Hypro Piston Pump 5324C-H

The Hypro 5324C-H Plunger Pump has a 5/8" ID hollow shaft. Constructed of cast iron, and featuring Buna seals, with 1/2" NPT ports. The hollow shaft can be directly mounted onto your motor or engine shaft, you must use the torque arm kit so that the pump does not rotate with the shaft. The pump must be allowed to float on the shaft; it must not be tied rigidly to the equipment to which it is mounted.

• 2.9 GPM Max
• 800 PSI Max
• 1800 RPM Max
• Cast-iron pump body
• Buna-N seals
• 5/8" ID hollow shaft
• 1/2" NPT ports
• 140°F Max temp
• Stainless steel plunger